Aircraft Maintenance Engineers

Aircraft Structural Contractors are currently looking for qualified and experienced Aircraft Maintenance Engineers  (Cert IV Aeroskills – Structures, Mechanical and Avionics) to join our aviation based in Nowra, NSW.

 

All candidates that apply will receive a phone call within 2 business days to go over details of this position.

 

Position requirements:

  • Cert IV – Structures, Mechanical, Avionics
  • Human Factors Training within the past 18 months
  • Current Australia Wide ASIC
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Ability to pass relevant Security Clearances
  • Experience on S70 (Type Certified) or equivalent, highly advantageous
  • Australian Citizenship

 

If you are interested in this position, please apply now! Any questions or queries regarding this contract, please contact Mikaela Witton at 07 5499 1181 between 0800am – 1600pm Monday to Friday, otherwise all queries can be emailed via Mikaela@ascpm.com.au

 

AAEAAQAAAAAAAAlUAAAAJDgxYzE1N2UyLTFlNTItNDI2Yy1hNDUyLWE1MGU4YTRmM2E0Mw

EOI Aircraft Maintenance Engineers – All Trades

Aircraft Structural Contractors are currently seeking Expressions of Interest for experienced Engineers of all Trades for potential contracts within Australia (Queensland, New South Wales). We are looking for contractors who would be able to start between now and mid-September.

Requirements

  • Cert IV/ Trade Certificate – Structures, Mechanical, Avionics
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • Heavy/ Line maintenance experience an advantage

Job Summary

Undertakes AME Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

 

  • AME duties typically involve the following:
  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to the effective operation of the relevant team by participating in Integrated Production Team (IPT) activities i.e. Lean+, 5S, and Employee Involvement (EI) teams
  • Contributing to improvements in the performance of the team (and the organisation generally) by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with EHS policies and procedures

Avionics Engineers

Aircraft Structural Contractors are currently seeking experienced Avionics Engineers for our aviation client based in NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV (or equivalent) – Avionics
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance

Job Summary

Undertakes AME Avionics Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

·      AME Avionics duties typically involve the following:

·      Aircraft handling, wash and servicing duties

·      Removal, Installation, disassembly and reassembly of aircraft components

·      Preparation and use of support & test equipment and ground support equipment

·      Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems

·      Not proceeding past any inspection point where a Maintenance Quality Inspection is required

·      Identification and demanding of aircraft spares

·      Reporting and recording unserviceabilities in accordance with approved procedures

·      Accurate completion of technical documentation / reports

·      Certification of completed tasks in correct document mediums, as authorised

· Ensuring all activities are completed for assigned tasks including any ancillary tasks as required

·      Prioritising personal work tasks and goals

·      Undertaking other duties as required (within the individual’s training and experience)

·      Contributing to improvements in the performance of the team (and the organisation generally)

by proposing solutions to problems and more effective methods of work

·      Ensuring compliance with OH&S policies and procedures  

Mechanical Engineers

Aircraft Structural Contractors are currently seeking experienced Mechanical Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Mechanical
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 Aircraft Heavy maintenance experience an advantage

Job Summary

Undertakes AME Mechanical Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

  • AME Mechanical duties typically involve the following:
  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to the effective operation of the relevant team by participating in Integrated Production Team (IPT) activities i.e. Lean+, 5S, and Employee Involvement (EI) teams
  • Contributing to improvements in the performance of the team (and the organisation generally) by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with EHS policies and procedures

Structural Engineers

Aircraft Structural Contractors are currently seeking experienced Structural Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Structures
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 Aircraft Heavy maintenance experience an advantage

Job Summary

Undertakes AME Structures Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

  • AME Structures duties typically involve the following:
  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to improvements in the performance of the team (and the organisation generally)
  • by proposing solutions to problems and more effective methods of work
  •  Ensuring compliance with OH&S policies and procedures

Aircraft Maintenance Engineers

Aircraft Structural Contractors are currently seeking experienced Engineers of all Trades for potential contracts within Australia (Queensland, New South Wales) and New Zealand. We are looking for contractors who are able to start between now and July.

Requirements
  • Cert IV/ Trade Certificate – Structures, Mechanical, Avionics
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • Heavy/ Line maintenance experience an advantage
Job Summary

Undertakes AME Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

  • AME duties typically involve the following:
  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to the effective operation of the relevant team by participating in Integrated Production Team (IPT) activities i.e. Lean+, 5S, and Employee Involvement (EI) teams
  • Contributing to improvements in the performance of the team (and the organisation generally) by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with EHS policies and procedures

Mechanical Engineers

Aircraft Structural Contractors are currently seeking experienced Mechanical Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Mechanical
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 Aircraft Heavy maintenance experience advantageous

Job Summary

Undertakes AME Mechanical Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

AME Mechanical duties typically involve the following:

  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to improvements in the performance of the team (and the organisation generally) by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with OHS policies and procedures

Structural Engineers

Aircraft Structural Contractors are currently seeking experienced Structural Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Structures
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 or other Fast Jet experience advantageous

Job Summary

Undertakes AME Structures Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

 

·      AME Structures duties typically involve the following:

·      Aircraft handling, wash and servicing duties

·      Removal, Installation, disassembly and reassembly of aircraft components

·      Preparation and use of support & test equipment and ground support equipment

·      Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems

·      Not proceeding past any inspection point where a Maintenance Quality Inspection is required

·      Identification and demanding of aircraft spares

·      Reporting and recording unserviceabilities in accordance with approved procedures

·      Accurate completion of technical documentation / reports

·      Certification of completed tasks in correct document mediums, as authorised

· Ensuring all activities are completed for assigned tasks including any ancillary tasks as required

·      Prioritising personal work tasks and goals

·      Undertaking other duties as required (within the individual’s training and experience)

·      Contributing to improvements in the performance of the team (and the organisation generally)

by proposing solutions to problems and more effective methods of work

·      Ensuring compliance with OH&S policies and procedures

 

Mechanical Engineers

Aircraft Structural Contractors are currently seeking experienced Mechanical Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Mechanical
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 Aircraft Heavy maintenance experience

Job Summary

Undertakes AME Mechanical Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

AME Mechanical duties typically involve the following:

  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to improvements in the performance of the team (and the organisation generally) by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with OHS policies and procedures

Avionics Engineers

Aircraft Structural Contractors are currently seeking experienced Avionics Engineers for our aviation client based in Newcastle, NSW. This will be a contract position with an immediate start. This position will report to the Trades Group Team Leader.

Requirements

  • Australian Citizenship
  • Certificate IV – Avionics
  • Ability to pass a National Police Check
  • Ability to pass a pre-employment Drug and Alcohol screen
  • Capable of obtaining applicable defence security clearance
  • FA-18 Aircraft Heavy maintenance experience

Job Summary

Undertakes AME Avionics Trade activities in support of modification, maintenance, manufacture and/or assembly activities for the aircraft and aircraft component maintenance.

AME Avionics duties typically involve the following:

  • Aircraft handling, wash and servicing duties
  • Removal, Installation, disassembly and reassembly of aircraft components
  • Preparation and use of support & test equipment and ground support equipment
  • Inspection, maintenance, servicing, repair, test and fault diagnosis of components and systems
  • Not proceeding past any inspection point where a Maintenance Quality Inspection is required
  • Identification and demanding of aircraft spares
  • Reporting and recording unserviceabilities in accordance with approved procedures
  • Accurate completion of technical documentation / reports
  • Certification of completed tasks in correct document mediums, as authorised
  • Ensuring all activities are completed for assigned tasks including any ancillary tasks as required
  • Prioritising personal work tasks and goals
  • Undertaking other duties as required (within the individual’s training and experience)
  • Contributing to improvements in the performance of the team (and the organisation generally)by proposing solutions to problems and more effective methods of work
  • Ensuring compliance with OH&S policies and procedures